19mm Hex Wheel nuts, these are for most OE (Original Equipment) Ford cars/wheels up to 2011 which take a large diameter wheel nut.
(please note some of the later cars (2012 on, use a smaller diameter wheel nut) - do not use these wheel nuts for these applications - if in doubt check)You must ensure that the wheel nuts do not 'bottom out' on wheel studs, for example if aftermarket studs, or 'bolt on spacers' are fitted - max stud engagement depth for these nuts is 21mm
Available in a large range of finishes to suit most applications.
Packaged in 20's unless stated
Not for use with Flat seat (eg original/standard/OE Toyota/Mitsubishi/Lexus wheels), Ball seat (eg original/standard/OE Honda/Rover/MG/VW wheels), or Aftermarket wheels.
**Please use the measurements and diagrams provided to ensure the product is suitable for your specific vehicle & wheels (including OEM) PRIOR to purchase due to the variations available. You are responsible for ensuring these are correct for your vehicle and Nuts4Wheels can accept no liability for correctly supplied products that are later found to be incompatible. **
All items must be installed and/or used professionally by a competent individual with the necessary expertise to ensure that a suitable product has been supplied, and that it has been fitted correctly.
- Additional Information
Thread Size M12 Thread Pitch 1.5 Seating 60 Degree Taper